calg1n.gif - 382 Bytes calg2n.gif - 382 Bytes calg3n.gif - 382 Bytes calg5n.gif - 382 Bytes calg4n.gif - 382 Bytes calg6n.gif - 382 Bytes calg7n.gif - 382 Bytes

dotclear.gif - 46 Bytes
California Glass Bending STC Tables
dotclear.gif - 46 Bytes
Acoustical Performance of Glass and Wall Constructions
dotclear.gif - 46 BytesOverall
Thickness
InsideConstruction
Space
OutsideSTC
Value
ISO
RW
3
Single
Laminated
Glass
1
1/4" (7.24 mm)1/8"0.030 P.V.B.1/8"3535
3/8" (9.53 mm)1/4"0.030 P.V.B.1/8"3636
3/8" (10.5 mm)1/4"0.060 P.V.B.1/8"3737
1/2" (12.1 mm)1/4"0.030 P.V.B.1/4"3838
1/2" (12.9 mm)1/4"0.060 P.V.B.1/4"3939
5/8" (16.2 mm)3/8"0.030 P.V.B.1/4"4040
3/4" (19.9 mm)1/2"0.060 P.V.B.1/4"4141
Laminated-
Insulating
Glass
2
1" (26.1 mm)1/4" laminate1/2", Air1/4"3939
15/16" (24.6 mm)1/4" laminate1/2", Air3/16"3939
1-1/8" (29.3 mm)3/8" laminate1/2", Air1/4"4040
1-7/16" (37.3 mm)1/4" laminate1", Air3/16"4242
2-7/16" (62.7 mm)1/4" laminate2", Air3/16"4545
4-1/2" (113.5 mm)1/4" laminate4", Air3/16"4848
4-5/8" (119.1 mm)1/2" laminate4", Air3/16"4949
1" (27.9 mm)1/4" laminate1/2", Air1/4" laminate4242
4-3/4" (120.7 mm)1/2" laminate4", Air1/4" laminate5151
Airspaced
Glass
1
1/2" (14.5 mm)1/8"1/4", Air1/8"2830 4
1" (27.9 mm)1/4"1/2", Air1/4"3535
11/2" (40.6 mm)1/4"1", Air1/4"3737
Monolithic
Glass
1
1/4" (5.59 mm)1/4" - - 3132 5
1/2" (12.4 mm)1/2" - - 3637 6
Walls 1 1/2" Gypsum board (both sides) screwed to 3-5/8" metal studs3636
4" Face brick, mortared together4545
6" Lightweight concrete block, two coats of paint each side4646
4" Hollow lightweight masonry block, plastered on both side4848
8" Dense concrete block wall, two coats of paint each side5252
Double layer of gypsum wall board, both sides, 3-5/8" metal studs, 3" sound attenuation blanket 5454
1 Tested under ASTM E90, panels caulked in place with wooden stops and glazing putty.
2 Tested under ASTM E90, laminated outside pane consisted of either 1/8"-0.030" P.V.B. -1/8" (total 1/4" thick), 1/4"-0.030" P.V.B. -1/8" (total 3/8" thick), 1/4"-0.030" P.V.B. -1/4" (total 1/2" thick), 1/4"-0.030" P.V.B. -1/2" (total 3/4" thick), panels caulked in place in single frame with wooden stops and glazing putty. Units with less than 1" airspace were factory sealed. All other units were constructed in place.
3 Weighted Sound Reduction Index (Rw) in accordance with ISO 717/3
4 Deviates below Rw 30 contour by 10 dB at 400 Hz
5 Deviates below Rw 32 contour by 9 dB at 2,500 Hz
6 Deviates below Rw 37 contour by 9 dB at 1,200 Hz
dotclear.gif - 46 Bytes


[ABOUT US] [BENT GLASS] [FLAT GLASS] [CONTACT US] [LINKS] [QUOTE FORM] [HOME]


California Glass Bending Corporation
320 East Harry Bridges Blvd.
Wilmington, CA 90744-6604
Telephone: 310-549-5255 or 800-223-6594 - Fax: 310-549-5398
E-mail: glassinfo@calglassbending.com

© 1998-2007 SanPedro.com - All Rights Reserved